How to Install Rockusb Driver V20 on Windows 7
Rockusb Driver V20 is a software that allows you to connect your devices powered by Rockchip chipset to your Windows 7 computer. It is compatible with Rockchip Batch Tool and Rockchip Factory Tool, which help you to flash the stock firmware on your Rockchip devices. In this article, we will show you how to install Rockusb Driver V20 on Windows 7 step by step.
Rockusb Driver V20 Windows 7
Download Zip: https://www.google.com/url?q=https%3A%2F%2Fbyltly.com%2F2tIxL2&sa=D&sntz=1&usg=AOvVaw3r_egKzVEt7bbLidsczcdI
Step 1: Download Rockusb Driver V20
You can download Rockusb Driver V20 from the following link: https://androidmtk.com/download-rockusb-driver. Choose the latest version of the driver, which is v4.7 at the time of writing this article. The driver comes in a zip file, so you need to extract it using a tool like WinRAR or 7-Zip.
Step 2: Install Rockusb Driver V20
There are two ways to install Rockusb Driver V20 on Windows 7: manually or automatically. We will explain both methods below.
Method 1: Install Rockusb Driver V20 Manually
This method requires you to use the device manager to install the driver. Follow these steps:
Open the extracted folder of Rockusb Driver V20 and find the INF file that matches your Windows 7 architecture (32-bit or 64-bit).
Right-click on the INF file and select Install. You may see a security warning window pop up. Click Yes to continue.
Wait for the installation to complete. You should see a message saying \"The operation completed successfully\".
Connect your Rockchip device to your computer via USB cable. You should see a new device named \"Rockusb Device\" appear in the device manager under \"Other devices\".
Right-click on \"Rockusb Device\" and select Update Driver Software.
Select Browse my computer for driver software.
Select Let me pick from a list of device drivers on my computer.
Select Show All Devices and click Next.
Click Have Disk and browse to the extracted folder of Rockusb Driver V20.
Select the INF file that matches your Windows 7 architecture (32-bit or 64-bit) and click Open.
Click OK and then Next.
Wait for the driver installation to finish. You should see a message saying \"Windows has successfully updated your driver software\".
Click Close and then Close again.
You have successfully installed Rockusb Driver V20 on Windows 7 manually.
Method 2: Install Rockusb Driver V20 Automatically
This method requires you to use a tool called Rockchip Driver Assistant, which can automatically install Rockusb Driver V20 on Windows 7. Follow these steps:
Download Rockchip Driver Assistant from the following link: https://androidmtk.com/download-rockchip-driver-assistant. The tool comes in a zip file, so you need to extract it using a tool like WinRAR or 7-Zip.
Open the extracted folder of Rockchip Driver Assistant and double-click on \"DriverInstall.exe\" to launch the tool.
You will see a window with two options: Uninstall Driver and Install Driver. Click on Install Driver.
You will see another window with three options: Normal Mode, Forced Mode and Exit. Choose Normal Mode if you have not installed any other drivers for your Rockchip device before. Choose Forced Mode if you have installed other drivers for your Rockchip device before and want to overwrite them with Rockusb Driver V20. Choose Exit if you want to cancel the installation.
The tool will automatically detect your Windows 7 architecture (32-bit or 64-bit) and install the appropriate version of Rockusb Driver V20 for you.
You will see a message saying \"Install finished\" when the installation is done.
Connect your Rockchip device to your computer via USB c481cea774